必一运动B-Sports

The CNG fueling nozzle (DN4mm) is used at CNG stations for refueling small vehicles.

A major feature of the TK10 fueling nozzle is its "push-to-connect" jaw locking system. There is no need to pull back the locking sleeve to establish a connection, making the connector extremely easy to use. The handle can be positioned at 45° or 90° angles, which helps prevent stress caused by difficult access to the inflation valve and abrasion on the ground hose due to the tight bending radius of the seal.

The nozzle also integrates a ball valve and a controlled discharge in one unit. Refueling can be completed through the following simple operations: push the TK10 into the inflation valve, open the ball valve until refueling is complete, close the valve, vent the residual gas, and pull back the sleeve to disconnect.